UltiPower lead acid battery reconditioner

DESULFATOR UBD- 1

(For Lead-Acid Battery Recovery)

PRODUCT OVERVIEW

Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the battery’s ability to receive, store and then deliver power. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task and so the battery is deemed to have “failed”. However using an UBD- 1 can reverse the process by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving a

battery’s life and capacity for an extended period. The UBD- 1 uses no

external power and generates a high-frequency pulse to dissolve batteries “sulfates”.

FUNCTION

The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength regaining the batteries ability to receive charging current and deliver discharge current.

ADVANCED TECHNOLOGY

Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery. This old technology creates a harsh inductor peak that can be damaging to the battery plates.

Utilizing our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates. Old technology also requires a large inductor so necessitating a physically large desulfator device whereas using our advanced technology design the UBD- 1 device is very compact yet provides BIG performance.

NEW CYCLIC PULSING FUNCTION

In a similar manner to a Pulse battery charger (charge – rest –charge – rest etc) a cyclic desulfating pulse function (pulse – rest – pulse – rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new UBD– 1

AUTO PULSE DESULFATOR BENEFITS:

_ Increases Battery Power

_ Extends Battery Life

_ Battery Charge Faster

_ Longer Discharge

_ Prevents Sulfate Build-up

_ Reduces Evaporation

COMPETITIVE ADVANTAGES

_ Fully Automatic voltage selection. 12V 24V 36V and 48V

_ New Cyclic pulse generation method for improved capacity recovery

_ “Soft” Peak Pulsing

_ Auto cutoff function to prevent over discharge of battery

_ User Configurable override for manual voltage selection:

USAGE METHOD

Just Red terminal connect to battery positive and black terminal to battery negative. And UBD- 1can cutoff when battery’s voltage is low.

3

MANUAL VOLTAGE SELECTION

If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage. In this instance it is possible to manually set the

desired operating voltage. By pressing the voltage select button. The LED

screen will first display the working voltage and if you want to then alter the working voltage setting just presses the key again and the unit will

change to next value. After setting the desired voltage the display will switch off to conserve battery power.

CUTOFF VOLTAGE

SPECIFICATION:

Model: JCP-1-A, B, C; JCP-2-A, B, C

Auto-setting for 12-48V battery

Working Amp: 20mA max

Peak Amp:   2A max

Peak Voltage:   60-100V

Pulse Frequency: 10,000HZ

LED light indicates when pulse working

Cutoff amp:    <5mA

Size:       88*56*23mm

Weight:      120g, including inner package

THREE TERMINAL CHOOSING

JCP-2-A, B, C directly connect to the battery by the terminal.

JCP-1-A, B, C connect between the charger and battery box plug. Input side is be plugged in by charger terminal, and the desulfator’s out side is same the charger terminal.