Ultipower 48v battery pulse desulfator

Ultipower 48v battery pulse desulfator

PRODUCT OVERVIEW

Batteries often fail because “sulfates” slowly develop and cover the battery plates. This sulfating process also weakens the electrolyte and this combined with the gradual coating of the plates slowly and almost imperceptibly reduces the battery’s ability to receive, store and then deliver power. This sulfating process gradually impairs battery function and causes a capacity loss until the battery can no longer perform the desired task and so the battery is deemed to have “failed”. However using an Auto Pulse Battery Desulfator can reverse the process by dissolving the sulfates, cleaning the plates and restoring the electrolyte strength so improving a battery’s life and capacity for an extended period. The Auto Pulse Battery Desulfator/Rejuvenator/Recovery unit uses no external power and generates a high-frequency pulse to dissolve a batteries “sulfates”.

FUNCTION

The High-frequency Peak Pulse delivers an electronically controlled pulse to the battery causing crystalline sulfates to dissolve back into the electrolyte and so restoring battery function and electrolyte strength regaining the batteries ability to receive charging current and deliver discharge current.

ADVANCED TECHNOLOGY

Many desulfator products use an old technology inductor design to generate the pulse to desulfate a battery. This old technology creates a harsh inductor peak that can be damaging to the battery plates.

Utilising our new capacity pulsing method a “soft” peak is generated so dissolving sulfates without damaging the battery plates.

Old technology also requires a large inductor so necessitating a physically large desulfator device whereas using our advanced technology design the Auto Pulse Desulfator device is very compact yet provides BIG performance.

NEW CYCLIC PULSING FUNCTION

In a similar manner to a Pulse battery charger (charge – rest –charge – rest etc) a cyclic desulfating pulse function (pulse – rest – pulse – rest etc) optimizes a batteries recovery process. This method of desulfation has been implemented in the new Auto Pulse Desulfator

AUTO PULSE DESULFATOR BENEFITS:

l  Increases Battery Power

l  Extends Battery Life

l  Battery Charge Faster

l  Longer Discharge

l  Prevents Sulfate Build-up

l  Reduces Evaporation

COMPETITIVE ADVANTAGES

l  Fully Automatic voltage selection. 12V 24V 36V and 48V

l  New Cyclic pulse generation method for improved capacity recovery

l  “Soft” Peak Pulsing

l  Auto cutoff function to prevent over discharge of battery

l  User Configurable override for manual voltage selection:

MANUAL VOLTAGE SELECTION

If the battery voltage is very low the automatic voltage selection may fail to set the correct voltage. In this instance it is possible to manually set the desired operating voltage. By pressing the voltage select button. The LED screen will first display the working voltage and if you want to then alter the working voltage setting just press the key again and the unit will change to next value. After setting the desired voltage the display will switch off to conserve battery power.

CUTOFF VOLTAGE

SPECIFICATION:

Size: 88*56*23mm

Model: Auto-JR01

Auto-setting for 12-48V battery

Working Amp: 20mA max

Peak Amp: 2A max

Peak Voltage: 60-100V

Pulse Frequency: 10,000HZ

LED light indicates when pulse working

Cutoff amp: <5mA

Size: 88*56*23mm

Weight: 120g, including inner package

What kind of batteries our desulfator is used to

Lead acid batteries, SLA batteries, AGM (Absorbed Glass Mat) batteries, gel batteries, deep cycle batteries, maintenance-free batteries (dry batteries)and it is 12V/24V/36V/48V combined, manually selected.

THREE TERMINAL CHOOSING

CLEN-A, B, C directly connect to the battery by the terminal.

CLEN-1-A, B, C connect between the charger and battery box plug. Input side is be plugged in by charger terminal, and the desulfator’s out side is same the charger terminal.